Master decorators acrylic fillercoat exhibits the following features:

|  Water based, so cleaning of equipment is a feast

|  Ultra matt finish

|  It has superior hiding power

|  It contains no harmful agents

|  It has an agreeable odour on application which will disappear in a short period of time

|  It is manufactured from a high quality acrylic emulsion

|  Excellent adhesion

|  Water based

|  Only requires one coat on most surfaces

|  Can easily over coated


Master decorators acrylic fillercoat can be used on the following surfaces:

|  Ceilings

|  As first coat on cement plastered walls


Application procedures

|  Clean all surfaces from dust, oil or other contaminants

|  If necessary a primer or sealer can be used depending on the nature of the substrate

|  Defects can be filled with an appropriate filler

|  Master decorators acrylic fillercoat can be applied by roller, brush or roller

|  Stir thoroughly before use

|  One coat of Master decorator’s acrylic fillercoat should be sufficient on most surfaces.

|  As this material is very easy to apply, care should be taken not to overspread

|  After application, the equipment and any spillage can be cleaned with water and soap followed by thorough rinsing with clean water

Maintenance of master decorator’s acrylic fillercoat painted surfaces

Surfaces that have been coated with Master decorator’s acrylic fillercoat are very easy to maintain-Just wash with an ordinary household cleaner or soft soap by using a soft cloth and it will be restored to its original pristine condition


Product information

|  Master decorators acrylic fillercoat is supplied in 1,5 and 20 litre containers

|  A wide range of colours is available

|  It has a spreading rate of 10-12 Metres² per litre (depending on colour)