RETEK POOL COATING

Surface Preparation

Raw Plaster: Remove all dust, foreign material, Fungal and Algae growth. Fill all visible cracks with Retek Crack filler.

Previously Painted Surfaces: Remove all loose, flaking and bubbling paint. Remove all dust, foreign material, Fungus and Algae growth. Sand and wash down with Retek Heavy duty degreaser and allow to dry over night before Retek Epoxy pool coating is applied.

Alternatively contact Retek coatings for application instructions.

Application

|  Mix part A separately, then add part B and mix thoroughly.

|  Use epoxy roller.

|  Cover ± 3m²/kg at 250 microns dry film thickness.

|  If necessary two coats.

|  Drying time 24 Hours at 25ºC. Full curing after 7 days.

 

Clean up

Clean rollers and equipment with Retek Thinners 300.

 

Drying

Fill pool with water after 7 Day’s.

 

Free delivery in Gauteng on Tuesdays and Thursdays for orders over R1000.

Standard courier charges apply in all other provinces of South Africa.

Bulk delivery rates are negotiable thoughout Africa.

Contact us for more information: (016)421-4299 or 082 527 2531