RETEK ARMOUR COATING

Type

Two components, cross linked epoxy

 

Colours: See RAL colour chart.

 

Preparation

Power clean as per SANS 10305-5:2005 3.3.1.4. or sandblast to SA 2½ with 75 microns profile.  Can be apply over primed surfaces.  Make sure that no contamination occurs between coats.

 

Application  ( Caution This is a hazards product. Always use  protective glasses, respirators and gloves)

Mix part A separately.  The dual pack will contain the correct amount of part A and part B and mix thoroughly.  Thinned with Retek Thinners 30.  Solids by volume 60%. 

The product can be applied by conventional spray gun, airless spray gun, roller or brush.  Solvents to clean equipment after use is available from Retek.

 

Coverage

± 10m²/kg – 60 microns DFT

 

Curing

|  Average drying time at 25ºC

|  Touch dry 3 hours

|  Over coat able – 5 hours

|  Hand able – 12 hours

|  Normal traffic – 48 hours

|  Chemicals resistant – 168 hours

 

Shipping weight

|  Part A + B – 5kg

|  Retek Thinners 30 – 5kg

 

Free delivery in Gauteng on Tuesdays and Thursdays for orders over R1000.

Standard courier charges apply in all other provinces of South Africa.

Bulk delivery rates are negotiable throughout Africa.

Contact us for more information: 082 527 2531