Retek Floor epoxy description

Retek scroll down button


We offer a variety of colours, which comes in pre-measured kit form. See Ral Colour chart

Recommended uses

This is a low cost flooring system which can be applied over your existing concrete, ceramic or quarry tile, wood and metal.  It can also be installed on vertical surfaces such as steps, walls.

|  House floors                                 

|  Warehouse

|  Bathroom                                     

|  Laboratories

|  Garage                                         

|  Walk ways

|  Workshops                                   

|  Locker and tea room

|  Store room                                   

|  Food process areas


Application ( Caution this is a hazardous product. Always use  protective glasses, respirators and gloves)

|  All surfaces should be cleaned from all loose debris, dust, oils, grease, animal fats etc.

|  Mix part A separately, then add Part B and mix thoroughly

|  Use Epoxy roller, brush only recommended for corners and touch-up.

|  No Primer needed.

Exposure Splash and Spillage Fumes
Acids Good Very Good
Alkalise Fair Good
Solvents Good Very Good
Salt Excellent Excellent
Water Excellent Excellent
UV:   Poor (see Poly urethane)  



± 3m²/per kg at 250 microns dry film thickness.


Drying Times

24 Hours at ± 20ºC.


Shipping weight

|  Part A and B   - 5kg

|  Retek Thinners 30 – 5kg


Free delivery in Gauteng on Tuesdays and Thursdays for orders over R1000

Standard courier charges apply in all other provinces of South Africa.

Bulk delivery rates are negotiable throughout Africa.

Contact us for more information: 082 527 2531



Retek floor buttons greyRetek industrial buttons greyRetek decorative buttons greyRetek tile buttons greyRetek applicator buttons grey